‘Solent Green’ sold at charity auction

This print was created in response to the Open Call by ‘a space’ arts to celebrate International Women’s Day 2022, by hosting a silent auction of artworks by female identifying artists, following a two week exhibition at ‘a space arts’ flagship venue, God’s House Tower (GHT). The print was sold on 8 March 2022, along with many other works of art, raising £1500 overall for local charity Yellow Door which helps victims of domestic and sexual abuse, and it was really good to support this worthy cause.

My print uses three shina plywood plates printed with blue /green inks to create a complexity of rhythmic patterns that give the effect of light reflected off waves. Use of blended ink colours on the second and third plate bring a sense of perspective to create depth. The image is based on a photo taken at Newtown Creek, a beautiful National Trust nature reserve providing a safe haven for sailors to put down their anchor for the day, or night, and popular with bird (and seal) watchers, on the north western coast of the Isle of Wight. The colours chosen reflect the colour of the Solent, the sea between the mainland UK and the Isle of Wight, where I have spent many days sailing, and, on a sunny day, the sunlight makes the sea a beautiful green, almost emerald colour; hence the name ‘Solent Green’.

I decided to print the plates as a bleed print (i.e. no border that would need to be float mounted), printing onto A4 sized (the required size for submissions) 300 gsm Somerset White Satin paper with deckle edges using Schmincke Linoprint Inks. These are waterbased and have some transparency but not as much as the oil based Caligo Safe Wash Relief Inks I normally use. But they have one big advantage – they dry very quickly and can be overprinted the next day. As I had spent so much time developing my design for the submission I had run out of time to use the oil based inks as they would take at least three weeks to dry, even using driers. I also decided not to print an edition due to the lack of time so this resulted in a unique print with just one artist’s proof.

The print was a great success, getting off to a good start when bidding opened and received lots of positive comments.

As the print seemed a success I decided to print a second edition ‘Solent Green II‘, printing the whole plate using oil based inks onto a larger sheet of smooth 145gsm Zerkall print paper so that the print had a border allowing it to be mounted traditionally (the photo below shows the original print using Schminck inks on the left and the one using Caligo inks on the right) . My presses at home can only accommodate a plate just larger than A4 in width so this meant a trip to Omega Printmakers in Southsea to use their magnificent 1892 Albion Press.

The print is inspired by Ayomi Yoshida (b. 1958), a printmaker and installation artist. Six years ago, early in my printmaking journey, I came across her work in a book by Avril Vollmer on making woodblock prints. Researching her work online I became captivated by her distinctive use of the gouge for mark making, her rhythmic repeating patterns, and, in particular, her abstract seascapes, which have a strong synergy with my own fascination with the sea, wave patterns and reflected light. Ayomi comes from a long lineage of Japanese artist printmakers, the Yoshida family, stretching back over 150 years, and unusually, is the third generation of female artists. Interestingly, like me, she studied architecture, but in Tokyo (I was at Sheffield University – a bit of a difference!), and while writing her graduation thesis in California she began exploring silkscreen printing but turned to woodblock printmaking when she could not find materials needed.

A print to commemorate the sailing of the Mayflower in 1620

This blog was written to accompany the online exhibition at God’s House Tower in Southampton ‘Navigating a New World: Mayflower 400′ launched in December 2020. It includes a number of artists prints from Cowprint Artists’ Group including my own print and cards ‘Downwind off Cape Cod’. We hope that the exhibition will open at GHT later in 2021.

Prints and cards available at GHT

I had spent over two months during the winter 2019 developing a number of ideas for my print when I finally decided to develop one specific idea to try to capture the sense of arrival the Pilgrims might have had approaching Cape Cod. I tried to imagine the scene on November 10th 1620, when, having faced treacherous seas off the Monomoy Shoals and strong head winds in a valiant attempt to reach northern Virginia, the Mayflower’s Captain reluctantly ordered her sails to be freed and to return downwind to seek the shelter of Cape Cod Harbour. It would have been bitterly cold on deck but a small group gather, hearts filled with the mixed emotions of trepidation and excitement of what lies before them. This scene brings back memories of my own adventures sailing across the Atlantic, and the stark contrast in experiences of that journey 367 years later.

Refining the design and transferring to the plywood block

In order to create a realistic image I needed to find some photos of a square rigger sailing and managed to find video footage online of the Mayflower II sailing off Brixham (where the replica had been built) in 1957 and from this I began to sketch out what the Mayflower might have looked like under full sail. I had also researched what Cape Cod actually looked like when approaching from the sea, both from recent photos and from descriptions in a seventeenth century English Pilot as well as Mourt’s Relation, an account of the plantation settlement, believed to have been written by Edward Winslow, one of the leaders of the Pilgrims, a few years after they had settled in Plymouth, Massachuesetts.

Cutting the design into the plywood veneer

I used plywood veneered sheets for my printing plates as I wanted to use the wood grain to create texture in the print, given that the Mayflower was a traditional wooden boat. It is important to select a grain that will work with the desired effect and for the finer cuts the grain should go with the direction of cut to avoid bits chipping off. Having finalised my design I transferred this to tracing paper and traced a mirror image onto a plywood veneer plate. This would be my key block holding the black outline of the design. I then transferred the design to a second plate which would hold the blend of colours forming the background of the sea, sky and the Mayflower. I then started to cut away the veneer that I didn’t want to print using very sharp bladed wood cut tools. Once both designs had been cut into the plates I proofed them, test printing them and refined the designs ready for editioning.

Proofing and refining the printing plate
The two plates ready for editioning

In order to get the smooth blend of colours representing twilight I arranged a number of different coloured inks across my inking plate and using a combination of rollers to blend the inks to get the colours I wanted. This was quite tricky and impossible to replicate from print to print as the more you blend the inks the more they change colour. This meant having to start reblending the inks from scratch several times to keep the colours as I wanted. I was also keen to use the orange colour to represent the timber of the Mayflower’s mast and deck which meant carefully removing the dark sky colours with a cotton bud and re inking the mast and ship with an orange / brown ink. Once the ink was dry I inked the key plate, taking care to get the registration correct, and printed this over the impression from the first plate to create the final print.

Blending the inks and applying the ink to the plate

My print entry for the 20:20 Print Exchange 2019

In September this year I entered the 20:20 Print Exchange with nine other members of Cowprint, the printmakers group associated with the Red Hot Press. The exchange is run by the Hot Bed Press in Salford, UK and has been running annually since it was set up in 2009 with an exchange of prints between the Red Hot Press in Southampton and Hot Bed Press. The project has grown rapidly with this year a record 18,300 prints from 732 artists and 45 workshops and groups as far afield as Moscow, Hong Kong and Canada.

Each artist is asked to produce a new edition of 25 prints on paper sized 20 x 20 cm. In return each artist receives a box set of 20 randomly selected prints including one of their own.

My entry was this four plate wood cut of the Magnolia in our back garden. In late Autumn the leaves turn shades of golden yellow and orange and in the morning light it shines like a beacon against a darker backdrop of woodland. The tree overhangs the lawn and I often wonder what it would be like if the lawn was a large pond instead. We often get damsel flies in the garden so it seemed appropriate to include a couple hovering over the imaginary pond.

Earlier this month Cowprint members gathered together to receive our boxes – there’s a lot of anticipation as to what type of prints you might get and where they might come from I was very pleased with my box which included some really beautiful prints and such a wide variety of techniques and subject matter.

For more details of my print see Autumn Magnolia and you can see my collection of prints from the box set below: