This blog was written to accompany the online exhibition at God’s House Tower in Southampton ‘Navigating a New World: Mayflower 400′ launched in December 2020. It includes a number of artists prints from Cowprint Artists’ Group including my own print and cards ‘Downwind off Cape Cod’. We hope that the exhibition will open at GHT later in 2021.
I had spent over two months during the winter 2019 developing a number of ideas for my print when I finally decided to develop one specific idea to try to capture the sense of arrival the Pilgrims might have had approaching Cape Cod. I tried to imagine the scene on November 10th 1620, when, having faced treacherous seas off the Monomoy Shoals and strong head winds in a valiant attempt to reach northern Virginia, the Mayflower’s Captain reluctantly ordered her sails to be freed and to return downwind to seek the shelter of Cape Cod Harbour. It would have been bitterly cold on deck but a small group gather, hearts filled with the mixed emotions of trepidation and excitement of what lies before them. This scene brings back memories of my own adventures sailing across the Atlantic, and the stark contrast in experiences of that journey 367 years later.
In order to create a realistic image I needed to find some photos of a square rigger sailing and managed to find video footage online of the Mayflower II sailing off Brixham (where the replica had been built) in 1957 and from this I began to sketch out what the Mayflower might have looked like under full sail. I had also researched what Cape Cod actually looked like when approaching from the sea, both from recent photos and from descriptions in a seventeenth century English Pilot as well as Mourt’s Relation, an account of the plantation settlement, believed to have been written by Edward Winslow, one of the leaders of the Pilgrims, a few years after they had settled in Plymouth, Massachuesetts.
I used plywood veneered sheets for my printing plates as I wanted to use the wood grain to create texture in the print, given that the Mayflower was a traditional wooden boat. It is important to select a grain that will work with the desired effect and for the finer cuts the grain should go with the direction of cut to avoid bits chipping off. Having finalised my design I transferred this to tracing paper and traced a mirror image onto a plywood veneer plate. This would be my key block holding the black outline of the design. I then transferred the design to a second plate which would hold the blend of colours forming the background of the sea, sky and the Mayflower. I then started to cut away the veneer that I didn’t want to print using very sharp bladed wood cut tools. Once both designs had been cut into the plates I proofed them, test printing them and refined the designs ready for editioning.
In order to get the smooth blend of colours representing twilight I arranged a number of different coloured inks across my inking plate and using a combination of rollers to blend the inks to get the colours I wanted. This was quite tricky and impossible to replicate from print to print as the more you blend the inks the more they change colour. This meant having to start reblending the inks from scratch several times to keep the colours as I wanted. I was also keen to use the orange colour to represent the timber of the Mayflower’s mast and deck which meant carefully removing the dark sky colours with a cotton bud and re inking the mast and ship with an orange / brown ink. Once the ink was dry I inked the key plate, taking care to get the registration correct, and printed this over the impression from the first plate to create the final print.
Following the success of my Pink Ferry linocut I thought that the Pink Ferry would also make a good subject for a wood engraving. I had also been thinking about designing a card for St Valentines Day using my newly acquired letterpress founts and seeing if I could successfully print both these and a wood engraving. I had tried this first with my Sea Fever card but had run out of time before Christmas to get consistently good prints and realised that the combination of printing pressure, make-ready packing and printing ink were not quite right.
I set about designing a simple silhouette of the ferry on tracing paper, transferring the image using red carbon paper onto a lemon wood block that had been dyed black with a light wash of Quink ink. I was a bit undecided how to depict the water so developed this as I proofed the block. I also decided to include a border to support the ink roller when inking up and to try avoid the cleared areas picking up any ink.
I then locked up the block with the typeface in a chase (called a forme) which I had already composed in 14 and 12 pt Perpetua, with spacing furniture and leadings. I then moved the chase to the moveable bed and checked all the typeface is flush with the bed by loosening the chase slightly and ‘planing’ the forme, using a flat block of wood (a planer) and a mallet or similar to gently tamp down the type before the chase is locked up tight. Initially, my proofs showed that the 14 pt ‘LOVE’ was out of line with the 12 pt ‘is …’ and needed a hairs width of spacing to lift the 12 pt up. I found that a small cut piece of Zerkall 215 gsm both above and below the 12 pt worked a treat!
I currently use an old cast iron Waterlow & Sons copying press to print my letterpress and wood engravings as a cheap alternative to a semi-automated press such as an Adana or Albion. I place the block or chase on a moveable bed made from a rigid flat board covered with a thin sheet of clear acrylic (marked up for registration) which I slide under the platen. You apply pressure by screwing down a platen and with a small block like this a hand tight pressure, with only two sheets of newsprint protecting the card to be printed, seems adequate. The platen seems to apply more pressure to the top left of the block and least pressure to the bottom right so the make-ready needs to be adjusted accordingly.
After quite a bit of trial and error I finally got the underlay and overlay of make-ready producing good prints. I used the blocks of wood as bearers to support the card, stuck down with tape.
I used a strip of newsprint over the card to improve the printing of the lower border. I also added a small square of newsprint over ‘share’ for the same reason.
I cut out a registration card for both the front and rear of the card (using my rubber stamp logo on the rear).
I’m very pleased with how this design and its printing has turned out but I suspect that if I had used a traditional letterpress ink instead of the Caligo Safe Wash Etching Inks I would have got better results still. Another lot of inks to purchase!
In September this year I entered the 20:20 Print Exchange with nine other members of Cowprint, the printmakers group associated with the Red Hot Press. The exchange is run by the Hot Bed Press in Salford, UK and has been running annually since it was set up in 2009 with an exchange of prints between the Red Hot Press in Southampton and Hot Bed Press. The project has grown rapidly with this year a record 18,300 prints from 732 artists and 45 workshops and groups as far afield as Moscow, Hong Kong and Canada.
Each artist is asked to produce a new edition of 25 prints on paper sized 20 x 20 cm. In return each artist receives a box set of 20 randomly selected prints including one of their own.
My entry was this four plate wood cut of the Magnolia in our back garden. In late Autumn the leaves turn shades of golden yellow and orange and in the morning light it shines like a beacon against a darker backdrop of woodland. The tree overhangs the lawn and I often wonder what it would be like if the lawn was a large pond instead. We often get damsel flies in the garden so it seemed appropriate to include a couple hovering over the imaginary pond.
Earlier this month Cowprint members gathered together to receive our boxes – there’s a lot of anticipation as to what type of prints you might get and where they might come from I was very pleased with my box which included some really beautiful prints and such a wide variety of techniques and subject matter.
For more details of my print see Autumn Magnolia and you can see my collection of prints from the box set below:
I saw this exhibition promoted on Instagram and thought I would give it a go and was thrilled to find out my wood engraving print ‘Erosion’ was selected. The exhibition opened on 1 May and runs until 2 June 2019 at the Southbank Printmakers Gallery, on the Southbank near the Thames (Gabriel’s Wharf), London. One of the prints was sold before the exhibition opened which made me think I ought to finish editioning the print pretty quickly.
I had been thinking about getting a platen press for a few months allowing me to print onto a heavier weight paper at home. I would love one of those beautiful antique Albion table top presses but they are very expensive and difficult to find so I looked on eBay for a cast iron copying press. I managed to find a bookbinder wanting to sell on a Waterlow and Sons, London Wall press at a reasonable price and picked it up last week. It is a rather odd lemon yellow colour over painted with black but, having given it a good clean, it seems to be in good working order and maybe one day I’ll strip it back and repaint it… one day!
Having searched the web for any information on using a book press for printing I found a few threads on wetcanvas.com on how to set up a sliding board with a registration plate to make it easier to put the block under the press. I was really pleased with the results – getting better prints than using a galley press.
I used the small polypropylene board that came with my Xcut Xpress with a polycarbonate registration pate marked up with a cm grid on top.
I experimented with different pressures and found that a single sheet of newsprint with a layer of craft felt on top gave a good result. I used a few blocks of softwood and a card registration plate on top to aid placing the paper ready to print.
The press has short screw handles (some have large brass knobs on the end). This seems to be its original design – may be it was a work horse press so didn’t need to look ‘pretty’! I did try putting some extra pressure on with a cut off scaffolding pole but that seems to create too much pressure in the far left hand corner so it seems that I can put on enough pressure without it.
Im really excited today as St Barbe Museum and Art Gallery in Lymington have selected this wood engraving for their forth coming Open Exhibition which starts on 23 March and ends 2 June 2019. This is only my second wood engraving, completed on an introductory course at the Red Hot press, Southampton in January 2019 with tutor Jutta Manser. This is also my first entry into an open exhibition too! Cant wait for the exhibition!
For many years we have walked the coastal path along the edge of Hamble Common looking out on to Southampton Water and to the New Forest and Isle of Wight beyond. Each winter the storms batter the soft clay and shingle shore line and clumps of the grassy banks gradually fall into the water and are washed out to sea. This winter I joined Hamble Conservation Volunteers to do occasional beach cleans and was surprised to see how far the banks of the Common have been eroded. What was really fascinating was how the clumps of grass work their way down the beach with each successive tide, gradually being eroded and appearing like tufts of hair rising above the incoming tide. This wood engraving image tries to capture the scene looking back towards the shore, across the shingle beach, as the tide comes in to claim more of the grassy clumps.
After finishing the course I set about editioning the wood block which was much harder than I thought it would be; getting the press set at the right height/pressure and just the right amount of ink to avoid loosing the crisp lines of the engraving. After a bit of practice I got the hang of it and managed to get some decent editions done.
In January I completed an enjoyable four week introductory wood engraving course at the Red Hot Press with Jutta Manser. The first week we practiced mark making on engraving plastic and selected an image to produce on a small block of lemonwood. I chose a 3 x 5 cm block which perfectly fitted the proportions of a photo of a Koi Carp. The second week we started to engrave our image. I have much admired Agnes Mills Parker’s engravings from the 1920’s and how she used strong contrasts of black against white to bring her subject matter to life and this image really lent itself to this approach.
Having got the Koi Carp block to a reasonable state to get some good clean proofs I moved on to designing my ‘Erosion’ block. I chose a 7 x 9 cm block and engraved the design so that I could proofed it along with the Koi Carp at our last session. Jutta had selected a number of different printing papers for us to try out and I found that the Zerkall handmade printing paper (210 gsm) from Great Art worked well with the relief press. I also tried hand burnishing with a little Yew sugar spoon my mother gave me which worked very well with the lightweight Okashi Japanese paper (29 gsm, also from Great Art) and another lightweight creamy paper (unidentified).
I was very pleased with the results and how I had been able to develop my recent fine linocut techniques to these intricate designs using the very fine mark making that can be achieved with wood engraving. Jutta’s years of experience in wood engraving was also was much appreciated!
Welcome to my new website! This website is in the process of being set up to showcase my prints and sketches. Initially I have added my recent prints which feature on the home page. I will be adding some of my earlier prints and my urban sketches over the coming months.